DC to AC
Today, you automatically lose 16% or more when DC is converted to AC for Solar systems and any models of wind turbines. It is a huge wastage of energy. Elquator Sdn Bhd, have therefore introduced a system that can change the fact that DC is only for small plants. By changing the structure and the method, we can today store energy in DC by changing the AC process conversion where there is no loss in the inverter etc.
By adding super capacitors you can charge and discharge energy storage really quick, we are talking about minutes/seconds whereby before it will take hours.
By changing the setup you have a release on demand system that can ensure that the power comes just as fast and you can store DC in very large quantities at very low cost. We use the DC unit as a module that keeps the system running and utilize the energy that the turbine emits as an AC source. It ensures that there is no loss in the inverter unit. The flow chart below shows the procedure.
DC to DC
Our Smart Energy system is designed to produce DC output with selectable variable voltage of 12, 24, 36 and 48 volts. When storing DC from a DC unit such as Solar plant and wind turbine, it is important to get the maximum benefit from the sun's rays as well as the wind turbine's rotation. By storing from the early morning sun to the first movements in the wind turbine, you have full benefit from its unit. Our Smart Energy System can be monitored from any smart phone and can also be switched from a smart phone. This means that regardless of where you are, you will always be able to follow your consumption and charging cycle and in some cases change the setup so that you can get better benefit from your Smart Energy System.
We currently use a technology that we have created and adapted with IT for the solar as well as the wind turbine world. The system is controlled by an ESP32 windows based system and each device can be updated for future use. All our PCB boards are labeled with serial numbers and the ESP32 is equipped with WiFi Hotspot so that it is easy to control and set the power consumption and for updating of firmware.
The Smart Energy System can be used for all AC products on the market, as they are equipped with pure sinewave inverters.